Frank O.
These 11x7 props are perfect for my turbo timber and HH arg crop duster.
robert c.
every thing was very easy to find and received just what i had ordered
John A T.
I bought 2- of 11x7 3- blade props as spares for my Turbo Timber and my Night Timber planes. Well-made and well packaged. Both were well balanced to within 0.5 grains. Both readily took the RC club’s recommended prop tip safety paint scheme. I did a slight precision reaming of the hub’s bore to snugly fit the Timber’s shaft arbor. I built a fixture to check balance. Both props ran smoothly up to 9,700 Rpms, or 90% throttle. Will buy again as needed.
Steve H.
Prop works great. Super nice people to deal with too!
Al N.
First flight
On landing, I rolled onto a small object on the runway. My TURBO TIMBER tipped over gently and a blade snapped from the factory prop.
AARON S.
Best props ever. I get smoother and longer flight times than ever before. No balance issues and they fit perfectly everytime.
Frank P.
Like it. Nice Prop.
George F.
Works great on my Turbo Timber.
Robert K.
Beautiful propellers Very efficient definitely would buy more of them
Robert K.
Excellent prop and looks great too!
Raymond R.
Allway works perfects on my Corsair, better respond and good performance.
Daniel F.
The quality is second to none. Received my order very quick. Very happy with this product.
Donald S.
Performance is excellent with this prop on the E-flite Air Tractor....I needed to bore out the mounting hole very slightly to get it to fit. I just used a small drill, you might be able to force it on tho......
James A.
These are great props: tough, balanced right out of the bag. Love them for my park flyer warbirds!
Bruce C.
great product, very little balancing needed but always do it. Never had a defective prop.
Marc D.
While I like the product and its packaging is great I wish the QA was better. I have never had a MS prop that was even close to being balanced. Sometimes the amount of sanding is extreme.
Shaun B.
Delivery was prompt. I had a spare prop and ordered the 11 x 7's as backups for the next prop chipping/breaking landing! Packaging is cool!
Eric H.
As always Master Airscrew products are high quality.
Claude M.
I have used and am using several sizes and blades, and have had no problem with any that I use. These resent props, 11x7 and 11x7r, I have not used as of yet. The plane is still being built. I am in the waiting mode of every thing to "come together". I am looking forward for this to happen,
James B.
The 11X7X3 was a replacement for a cheap fragile thing that came with the plane. I do Like the durability of the Master AirScrew. The prop did not require balancing and performed as expected, very Quite. Any Of th replacement props I purchase will be Master AirScrew.
Jimmie L.
This prop works well with my Turbo Timber.
Scot S.
Bought these to replace my 10 X 7 props that I ordered two weeks ago. They were a little too small so I wanted the 11 X 7's to replace them. An expensive mistake on my part.
Anyway, good quality product, shipped in a reasonable amount of time and at a reasonable price. Just as a side note, the 11 X 7's had sharp edges so I lightly sanded them to smooth them out. This was not the case with the 10 X 7's.
jeff w.
Great propeller. Works great on my turbo timber. Thanks
Bill S.
Great company, great products, fast shipping.... Nuff said.
Art A.
Props were extremely well made and I couldn't believe it when I received them in two days.....
Robert S.
The shaft hole was not properly cleaned after the moulding process. the shaft nut and washer wouldn't secure the prop correctly so I had to clean the hub off so I could use the prop. I thought they were a better product!
James C.
I fly control line and based on past experience, I've found that the 3-blade 11 x 7 and 11 x 6 propellers works very nicely on my Fox 40 powered Big Tiger. It provides sufficient load to the motor thus allowing me to get consistent 5.0 - 5.20 second laps on .021 x 63 foot steel cables.
William R.
Hi folks, I have a wind vane in the form of an f6f hellcat,that I flew , while I served in the U.S. Navy in the 1940s...It needed a new prop., and yours fit perfectly and performs even better!!!Thank you....
Maurice E.
I have used the Master Air Screw 3 blade 11 x 7 x3 prop for almost 4 years with absolute perfect service.
Geoffrey L.
MAC were very prompt in dispatch to UPS. UPS were abysmal in the UK. They claimed to have tried to deliver at 6.30am to a business address, claimed to be trying to contact me to arrange delivery and collect the VAT but never did. They must have passed the parcel to the Post Office who did notify me a week later and charged a further £8.00 handling charge + VAT so the charges were almost equal to the value of the props! Props themselves are very well finished, only required slight correction for balance and generate a lot more thrust than the standard 11*7*3 from Dynam.
Edward H.
I would recommend all MAS products to all concerned.
Neil M.
Your propellers are incredible and unmatched by any other manufacturer!
Michael G.
This prop went onto a Telemaster 40 powered by a Saito 56. Good combo and the three bladed proper improved performance and looks.
James L.
Excellent product first class shipping!
Fidel A.
Excellent service, product and shipment. Another winner!
