Michael C.
The three blade prop was a great solution for my Stick. More watts without increasing the prop length. Master Airscrew props are precise and dependable. One of the best.
WAYNE N.
Excellent product I am a mold maker in the toolroom at apple rubber products...minimal flash...blades run true!
Donald S.
One of the stock props broke in flight on the V2 Bush mule. Replaced with MAS 10x7 3 blade. You need to tap them on because it's a tight fit over the hex which is a good thing. I used a deep socket that fit over the shaft and hit them on... Props are very nice
Morad H.
Very nice propeller. I have ordered more.
Steve O.
I got this 3 blade to bring up the scale and get a bit more clearance on my seaplane. PERFECTLY balanced and looks fantastic, great performer !
Philip S.
Great upgrade from stock props! Improved performance and looks great too.
Mark B.
I haven't utilized this prop yet but the good thing is that I know how it is going to perform well. I've used Windsor props on many types of planes throughout the years and all of them worked very well.
Eric G.
Bought these 2 bladed props for my VQ Models Twin Otter 74” wing and they look great!
Mike G.
Great product and speedy delivery!
Eric S.
This prop seems to absorb the power of the motor.
JEROME W.
Used it on a Ranger EX.
It replaced a "stock" 10 x 5 pusher prop. The 10 x 7 ended all of the aerodynamic problems I encountered with the 10 x 5!
Rodney L.
Worked perfect for my .52 powered stick
Joseph C.
MA 10x7's 3-blade props used on 120" Martin MARS, left side standard rotation, right side reverse rotation.
Leopard LC3542-6T, 3S, 11.9V x 34.4A = 409 watts
Leopard LC3542-6T, 4S, 14.4V x 51A = 734 watts
Yes would buy again
walter t.
Very well made and fits my plane perfectly
Tom T.
So this is what I did with my 1800 mm FMS ranger I installed a power 25 motor 1250 KV 60 amp ESC cranking this awesome 10x7 triple blade Master airscrew propeller and let me tell you the performance is awesome thank you guys I highly recommend Master airscrew propellers
Floyd J.
I haven’t flown the props yet. I have a modified BF-110 (Dynam) that they are mounted on, but I haven’t flow through plane yet.
Bob Y.
Fantastic products!!!!
philip r.
Excellent fit and far superior then the FMS props
horace d.
just what I needed good quality
Thanks
Carl G.
I love these props. Well looking, strong and well made. I will continue to use them!
Emil S.
Ordered wrong prop and trying to return it for the correct prop. have tried to contact MasterAir Screw for four days now via email and voice message but zero response.
Murat E.
I always use Masterairscrew propellers on my airplanes. Sturdy and well balanced out of the box.
David P.
Props perform well on my HK B17
Dallas L.
Had a problem with one of the props and customer service responded very quickly. Thank you very much. Great company.
Anthony H.
Excellent propellers 3x10x7 800kv on 4s
Kyle S.
Great prop for my trainer plane quiet and powerful.
Kyle S.
Quiet and performs great with low noise and great thrust.
Bill B.
Master Airscrew props are some of the best available however this order didn't go well. 8 days after ordering I had to ask MAS where my shipment was. They created a mailing label, sent an email that it had shipped but it never left their facility until they were pinged.
Steve K.
Nice well balanced props the only thing I have to say about them is I didn't get the shaft adapters with them but got a set for the pusher ones whats up with that? Dug around in my parts box found some that worked. Haven't been able to try them out yet due to weather but have a good feeling they will be great.
Richards E T.
Perfect balance
Tom K.
I’m into scratch building RC planes and you have a nice selection of products for my non standard planes. Most importantly you have an easy site to navigate and the check out is simple.
Philip B.
works for what i needed it for like the look also
John T.
Huge increase in performance.
AIDAN M.
Very pleased with the four Master Airscrew Propellors I received. Many thanks.
Richard H.
Haven’t flown the prop yet. Balance was good though.
AIDAN M.
I have 4 of these props on my B-17 fLYING fortress. Two normal and two reverse pusher. Very nice props and work great.
Scot S.
I am building a large scale (1/5) Seneca II twin engine airplane and I am using your props as they are top quality and look very real in comparison to the real thing. I may end up using the 11 x 7 props one everything is finished and I can determine which size will look the best.
I am using them with Tru-Turn spinners so they should have an excellent appearance.
Gary B.
Master Airscrew is my go to source for the high quality RC aircraft propellers. Highly recommended.
Phillip I.
Using the prop for home scratch build and it works great. Lots of power. Will buy again for sure
Bob V.
Great product as well as great pricing. Fast delivery.
Jeremy P.
A lot more thrust than stock prop very sturdy,also great customer service I had a question and got a reply very quickly
Dariusz G.
Very nice propeller. Most important thing is the balance, almost perfect. Very quiet working very good.
TODD A.
Nice sturdy balanced props would buy again
Donald Y.
Got it quickly. I will need another one.
Thank You
Miles J.
Fitted the pair (L and R rotation) to my Bush Mule, which now performs quieter, more thrust with less throttle. Very happy with this purchase.
David M.
After only two flights with the stock props on a Bushmule, they got replaced with MA 10x7 three blade props, one normal and one reverse pitch. They run MUCH smoother than the stock props! With a fully charged 4S 3300 lipo these props pulled 65 amps combined. The stock Bushmule ESCs are rated at 30 amps each, so it's only slightly high. Since the Bushmule doesn't need continuous full throttle power, I consider these 10x7 three blade props to be an upgrade over the stock props and well worth the money.
John R.
I have been using MAS props for years. No issues. Great replacement for Hobby King Bush Mule.
charles p.
This prop upgrade was recommended by Robert Petrincic on youtube for the HobbyKing B-17 bomber. The provided props included with the bomber were inefficient but did work.
The Master Airscrew props work much better and keep in mind this plane uses counter rotating props (descending)
Marshall W.
I ordered these to replace the factory 11×6. I wanted a little more ground clearance on my 182 sky trainer. They worked fine but they don't have the torque to pull a 55" Cessna out of trouble. So I'm back to the 11×6. The 10×7 should work fine on my 50" Cessna.
DON B.
VERY SPEEDY SERVICE !!
John R.
Mater Air screw are the featured props in my shop.
John R.
I am using a number of Master Air screww products, no issues at all.
John K.
The propeller came perfectly balanced. I gently removed the sharp "flash" and installed the prop. It is quieter running than the 11 X 7 APC I removed. Performance has not degraded.
John R.
A perfect match for the Freewing or Hobby King B17's, love this prop, does a nice job and handles crashes much better.
FRANKLYNE C.
For years, Master Airscrew as provided excellent products, Not only in propellers, but in building tools. Check out the Master Airscrew wood stripper. Save money on balsa wood with this stripper. Take ordinary balsa slabs and cut them down to stringers and spars. I used mine with every build.
John T.
Fitting a pair Made a SIGNIFICANT improvement in performance to the plane just as I expected them too.
John T.
Fitting a pair Made a SIGNIFICANT improvement in performance to the plane just as I expected them too.
Michael R.
What I want is always in stock as Master Airscrew, no wasted trips to the hobby shops looking for something they don't have. Very fast, accurate service from Master Airscrew.
Morris L.
I bought an Avios Bush Mule both as a sport plane and as a float plane. I found the supplied props were as a number of RC Groups posters had said - prone to break. One small mishap on takeoff and a blade broke off. I ordered two 10x7x3s from you, and the plane flew very well with them. Unfortunately, I pranged it again - this time bad enough to require a new fuselage. The MAs survived the mishap. I've used MA props for the 20 years I've flown RC in various glow and electric planes and have never been disappointed.
David T.
original props were out of stock. Airscrew props were better than stock props. Better made and stronger
Gorm P.
Fast delivery!
I live in Denmark and it took less than a week for the parcel to reach me
Paul B.
The girls tell me the quicker response and less vibrations make them totally awesome!! Best prop I have ever purchased. Not the first set and not the last, I just wanted to show off my Bushmule. Lol
Robert W.
good prop for the job
Denny K.
These are a must if you have a bush mule
John T.
I ordered this in New Zealand on Wednesday morning (local time) and it arrived from the USA at 9AM (local time) the following Monday! You just can’t beat that kind of service!! Really happy and will be buying all my props (where I can) direct from MAS in future!
Fidel A.
Excellent product, the best propeller for all applications. I really miss a 4 blade prop but, three blades would do. Thanks Master Airscrew.....And please, DON'T move to China!!
John W.
It gave me the ground clearance and the Watts I needed.
Dan C.
Change the props on a Bush Mule to Master Airscrew. Outstanding results. Very smooth right out of the box. The stock props were out of balance and flimsy. These were just the ticket. Much more power and greatly improved sound.
Greg L.
Very nice and durable at a decent price. These are the only one I use.
Donald D.
Using with multicopters. Efficiency isn't bad at all.
Rost H.
am 15.11.2017 bestellt, heute 23.11.2017 angekommen. Super Service. Die Propeller werden an einer Twin-Otter arbeiten, aber erst im Frühjahr 2018.
Bruce B.
Probably the best propellers on the market and at a reasonable price with prompt delivery.
Hernan D.
Hello, thank you very much. The product arrived quickly and although it still was not tested, it is in perfect conditions. Coordinated greetings.
james f.
I am new to electric r/c...I am a pilot with several rating..I find your props to be of great quality,,,and most of all I find that your staff is very helpful with questions and answers,,very much appreciated and I will buy again from them.
